Thread: TPMS On A W209 MY2005

Hello,
can you please tell me what will be needed for retrofitting the TPMS system on a W209 MY2005?

Thanx in advance!

Hello ,
i just bought 4 wheel sensors A0035400217, code 470=Tire Pressure Monitor (TPM) Low Line

Now i can only see what EPC says (WIS is not available) and according to that i will also need 1 x A0035403945 Control Module (With Bracket, Screw etc) and 1 x Wiring Harness

Is that correct? Do i need only one control unit or am i missing something?

Thanx

It depends ....

The old version had 4 antennas and the much later version (CLK63) has just internal antenna wire.

Any idea on how i can find what exactly will be needed?

Originally Posted by SchwarzesAMG

Any idea on how i can find what exactly will be needed?

There is a TPMS section in EPC but you need to find the variation type of TPMS you want to install.

I suggest you look at a chassis number like CLK63 with this option. That was the later version.

Under this section in EPC i see in both my CLK (a late 209.342 model) and the CLK63 the same parts! ( 4 x sensors, 1 control module, 1 wiring)
Do you know where should i fit the control module? It comes with a bracket!

Originally Posted by SchwarzesAMG

Under this section in EPC i see in both my CLK (a late 209.342 model) and the CLK63 the same parts! ( 4 x sensors, 1 control module, 1 wiring)
Do you know where should i fit the control module? It comes with a bracket!

The module goes under the passenger feet near the transmission module.

Ok, so good luck to me! I hope its gonna work without driving me crazy