Hi, all.

In this statement (I am not able to reply to that topic)

"a) check that you dont have memory seats, (we assume not)
b) Purchase a passenger side memory capable mirror frame (add folding if you have this feature)
c) carefully remove the wiring and motor from the new mirror frame.
d) carefully dismantle the mirror frame from the passenger side (no need to remove metal parts) - just remove plastic mirror cover and wiring and motor (remove only the access cover not the whole door trim).
e) install newer motor and wiring and assemble mirror
f) in developer mode code for SPEIGELEINSTELLUNG as a menu option in the cluster.
g) code the passenger door controller for memory.

When reversing select the pasenger mirror. There is a preset amount which the mirror will move down. Unlike a memory capable car you will not be able to adjust the amount. It should be sufficient.

Applies to CLK, CLS, E, SLK, C, SL, ML"

I have done all this to no avail.

My front DCM were supplied by MbenzNL and are A2038201485 / 1585, to comply with the foldable mirrors I bought from them.

Can someone check my P/Ns so I know if they are ok for the job?

Thanks