Thanks very much Richard!
I am on my driveway typing this as I fix my car! Couple more quick questions please...
Quote:
The 3 way connector goes into the back of the COMAND unit (instead of the AUX cable)
The 2 way connector (with brown,brown/red) wires goes into the CANbus distributor which is fixed to the bottom of the aircon system, you can see it by looking up under the passenger footwell when the panel is removed. This is shown in the last picture in section (e) in my document.
|
Does it matter which hole it goes in ? does it have to be bunched with the rest or can I fit it in the last one as that one went in easy!
Quote:
|
The wire in the blue connector and the single core brown cable are the CANbus (note they are twisted together). They replace the same colour wires in the AGW fibre connector, and the wires you remove go into the blue connector shell so they do not short out. Earth goes to the earthing point in the boot, the black power connector plugs into the back of that rear fusebox, directly behind the blue connector - as shown in the 1st picture in section (e)
|
This is reassuring, I though the single brown cable had come out of the blue plug by acccident. So to clarify.. I take a brown and brown/red cable out of the AGW and place them in the blue plug. The remaining cable go in the AGW.
Earth to Earth point - done
Black power connector - will do that when I can get the unit out.
Dynamic seats? - I have a box about the size of a 6 pack of beer to the left of the DVD unit - is this causing me the grief?