W164 ML, W164 GL, W251 R Class reset service indicator
This applies to the W164 ML and GL class and the W251 R class
a) Turn ignition key to '1'
b) Press the lower system selection button (left hand edge of steering wheel) repeatedly until you have the Basic display with mileage or temperature in the display
c) Press the odometer reset button briefly 3 times and you see the voltage display on the cluster and a ping is heard
d) use the scroll down arrow button until you see the 'Service menu'
e) Use +/- buttons to select the menu item CONFIRMATION then press the lower system selection button to confirm ("Complete service" is highlighted in dispay)
f) Confirm full service by pressing lower system selection button
g) Press top system selection button until you get back to Service menu
h) Use +/- buttons to select the 'Special Work' menu and Press the lower system selection button to confirm
i) Use +/- buttons to select Service 3 & press lower system selection button to confirm
j) Use +/- buttons to select the oil grade you used & press lower system selection button to confirm (nb, where only 1 grade of oil is allowed, there wont be a selection available)
k) repeatedly press lower system selection button until out of service mode
Last edited by richard; 06-19-2009 at 10:22 AM.
|