W169 A class, W245 B class reset service indicator
This applies to the W169 Mercedes A class and the W245 Mercedes B class.
a) Turn ignition key to '1'
b) Press either of the system selection button (left hand edge of steering wheel) repeatedly until you have the Basic display with mileage in the display
c) Press the reset button (the dimming button on the cluster) briefly 3 times and you see the voltage display on the cluster
d) use the scroll down arrow button until you see the 'Service menu'
e) Use +/- buttons to select the menu item CONFIRMATION then press the lower system selection button to confirm ("Total Service" is shown in dispay)
f) Confirm full service by pressing lower system selection button
g) Press top system selection button until you get back to Service menu
h) Use +/- buttons to select the 'Additional Work' menu and Press the lower system selection button to confirm
i) Use +/- buttons to select Service 3 & press lower system selection button to confirm
j) Use +/- buttons to select the oil grade you used & press lower system selection button to confirm
k) repeatedly press top system selection button until out of service mode
R
Last edited by richard; 06-19-2009 at 10:24 AM.
|